User manual

28 29
28 29
The other alternative is for you to enter a name against individual run-
ways. To do so you need to first enter the ICAO code for the airport
you want to display, then hit ENTER or select the Display Runways
button. In the following screen shot example we‘re displaying the
runways for KORD:
Using the above configuration, if departing runway 4L Clearance
would confirm „Cleared as filed, squawk 1234, Mike-Alpha-Four-Lema
at Five Thousand departure approved“. You would also hear the same
from Tower when being cleared for takeoff.
Departing runway 14L you would hear „Cleared as filed, squawk 1234,
Alpha-Delta-Lema-One-Four at Six Thousand departure approved“.
Departing from any other runway (other than 4R) you would hear
„Cleared as filed, squawk 1234, Delta-Papa at xxxxx Thousand depar-
ture approved“. Where xxxx would be determine by PFE at the time
of the clearance and would normally be set at an altitude halfway
between the current airports ground elevation and the altitude set for
the first waypoint. Eg. If your departure airport‘s elevation is 1,000‘
and the first waypoint‘s altitude is set to 11,000‘ then the cleared to
altitude would be 5,000‘ (11,000 - 1,000 / 2).