User manual

Pro Flight Emulator Deluxe
Aerosoft GmbH 2007
24 25
24 25
Support to increase this as an aid to collating data with regard to
any problems but be warned, setting this to 8 or 9 will produce
very big logs.
On the right-hand side of this page you will see the following options:
Check for Program Updates each day - ensures you always keep up
to date with any program updates.
Easy ATC - which is the ProFlight ATC hand-holding option for those
new to flying and ATC.
ATC calls Alt Baro pressure in Millibars - when contacting a new
facility and when below the current TA (transition altitude) ATC will
read out the current barometric pressure. By default this is read out in
inches of mercury as two-niner-niner-one (29.91), but selecting this
option the call will be made in millibars as one-zero-one-three (1013).
Airway Deviation - by default ATC will nag you if you are +4 or -4
miles off the designated airway. You can use this option to increase
this margin or set it to zero to turn the ‚nags‘ off completely.
FS Inactive Time - is the amount of time PFE will wait if not getting
any response from FS before closing down.
Hold for Jets and Hold for Props - sets the distance at which you
will be told to hold for inbound traffic whilst waiting for takeoff clea-
rance.
Pause Mode - An old favourite... this determines the distance from
either the FAF or the runway you want to pause FS/PFE.
Hold Percentage Probability - set between 0 and 100 to decide on
the probability of you getting a hold on route, dependant of course of
several other factors.