User manual

22 23
22 23
The first options page (shown below) replicates some of ProFlight‘s
options.
At the top left you will see you can enter the Pilots Voice you want to
use, the Airline and a Callsign. These entries will override any you have
set in ProFlight. This you may find useful to ensure you always hear the
Airline/Callsign and Voice you want, regardless of the ADV Flight File
you may be using or who might have created it. This was of value to
me during developement as I was able to run ADV files created by va-
rious testers but was always ensured of hearing the callsign I wanted to.
Below this you will see the various CoPilot modes available, all of
which are fully explained on the options page. Selecting a particular
mode will ensure this is the one that will be used for all loaded ADV
Flight Files. This mode can also be changed at anytime during your
flight simply by using the C\S\V hotkey.
Below the CoPilot modes is the Volume control which allows you to
set the volume of the ProFlight calls.
Below the volume control there is a Debugging control. This control
filters the information we want written to the debug logging file.
Normally this would be set to ‚5‘ but you may be requested by PFE