User manual

Pro Flight Emulator Deluxe
Aerosoft GmbH 2007
14 15
14 15
Getting Started
First Steps... only steps...
Here a very brief bulleted summary of how I use PFE/ProFlight/FS, follo-
wed by more detailed instructions on how to do so.
Start FS.
Create a Flight Plan.
Start PFE.
Select Convert a Flight Plan to convert it ready for ProFlight
2000.
Start ProFlight 2000, select the converted FS Flight Plan then
Compile it.
From PFE select the ADV Flight File just created in step #5.
From PFE select Connect to FS.
Enjoy your flight.
... and now with a little more detail thrown in
The very first step is to remember how you used to use ProFlight 2000
and then do so again in exactly the same way as you did in the past. If,
like me, your memory is not quite what it used to be, or perhaps you are
completely new to ProFLight, then please refer to the ProFlight 2000 user
manual. If you can‘t find the printed manual there will be an electronic
one available from the Start menu after the installation is completed.
Basically you need to create a flight plan. This obviously has to be in
FS2000 format so you will have to use a flight planner capable of pro-
ducing such a flight plan (note: FS2004 and FSX can both read FS2000
flight plans).
Please Note: This restriction to use an FS2000 flight plan format is
obviously due to ProFlight 2000 itself, as this program has not be al-
tered in any way - furthermore it was never our intention to do so nor
will we attempt to do so in the future.
1.
2.
3.
4.
5.
6.
7.
8.