User manual

Pro Flight Emulator Deluxe

Aerosoft GmbH 2007

12 13

What have we changed in PFE from the

way it used to work in ProFlight 2000

Hotkeys

The following default hotkeys are used to interact with PFE:

The original ProFlight 2000 program required you to use the Ctrl+Shift

key combination for all hotkeys (communication keys) and we have

retained this requirement with the exception of 0 thru 9 and the Roger

keys, where you only need to use a single keypress.

0 thru 9 has been used to replace ProFlight‘s Control+Shift+0 thru

Control+Shift+9.

We used these as they are normally used to interact with FS ATC, and

since you won‘t be using that we thought these keys would be best

suited to use in PFE without causing any contention issues with FS.

\ has been used to replace ProFlight‘s Ctrl+Shift+‘

So, to contact Clearance Delivery simply hit the 0 (ZERO key) whereas

to change the CP mode you would use Control+Shift+V

To Roger back to ATC just use the \ (backslash) key

All other keys are as described in the ProFlight documentation... a

listing of these keys is also provided in the ﬁle named ProFlight 2000

Commands.htm which can be found in the PFE\Help folder. These

details are also available in the ‘Getting Started‘ section of this manual

under the PFSK Commands section.