User manual

86 87
86 87
Enter Key: Return, Keypad 5 or Enter.
Importing FS Flight Plans
To avoid the hassle of entering a flight plan into the Trimble, a function
to import a flight plan from FSX is available. This requires three simple
steps:
First, go to the FSX Flight Planner (Menu „Flights | Flight Planner“)
and create or load the desired flight plan.
Click on the Trimble. If a flight plan is loaded it displays
„PRESS ENT TO IMPORT FS FLIGHT PLAN“.
Click to import and activate the flight plan.
The flight plan is now ready for use. To make the aircraft follow the
route, you have to set the VOR/GPS switch to GPS and activate the
NAV mode on the autopilot.
Note: If the VOR/GPS switch doesn‘t change to GPS, it‘s likely that
an ILS frequency is selected on the NAV1 radio. Valid ILS frequencies
are all frequencies between 108.10 and 111.95 where the first digit
after the decimal point is odd. For example: 108.10, 108.15, 109.30,
110.10, 111.35, 111.95. To solve this problem, just tune a non-ILS
frequency like 108.20 on the NAV1 radio.
•
•
•