User manual

Piper PA-31T Cheyenne X
Aerosoft GmbH 2007
86 87
86 87
Keyboard Entry Mode
On the real Trimble, you can only select or enter waypoints by using
the two concentric knob. This is already hard to do, but it‘s even
worse if it must be done with mouse clicks. To make data entry more
comfortable, we added a keyboard entry mode which is activated by
the SCROLL LOCK key. This key toggles the keyboard input mode on
or off. As soon as it‘s on, „KBD“ will appear in the upper right corner
of the GPS display.
As an alternative to the SCROLL LOCK key, you can also use a click
spot on the data card between the AUX and NRST keys.
Important: Keyboard entry mode only works in the default view of
the 2D panel and in the virtual cockpit. It‘s not possible to use it in the
IFR (down) view.
When the Trimble is in keyboard entry mode, the following control
keys are available:
Outer Knob: Cursor Left, Cursor Right, Keypad 4 (left) and Keypad 6 (right).
Inner Knob: Cursor Down, Cursor Up, Keypad 2 (left) and Keypad 8 (right).