User manual

Piper PA-31T Cheyenne X
Aerosoft GmbH 2007
84 85
84 85
User Interface
The Trimble Approach Plus is controlled by nine buttons and two
concentric knobs.
The Power Switch is located at the upper edge of the display. Use this
switch to switch the GPS on and off.
The Outer Knob is used to control the input cursor and to flip between
display pages.
The Inner Knob is used to select items.
Switches the GPS to Navigation mode. This mode displays information
about the aircrafts position on its current route plus arrival times, fuel
usage etc.
Switches the GPS to Waypoint Selection mode. This mode is used to
select waypoints from the navigation database.