User manual

74 75
74 75
Channel Mode
The Channel Mode is used to recall preset frequencies stored in memory.
To enter the Channel Mode momentarily, push the channel
button while in the Frequency Mode. The active frequency
remains displayed in the „USE” window, and the last used
channel number and its associated frequency are displayed in
the „CHAN” and „STBY” windows.
If no channels have been programmed, channel 1 automatically
disappears and dashes are displayed in the „STBY” window.
Turn either frequency selection knob to change the channel
number and the channel’s corresponding frequency in the
„STBY” window.
If there is no activity for five seconds, the radio will exit the
Channel Mode and return to the Frequency Mode, with the
channel frequency remaining in the „STBY” window.
You can also return to the Frequency Mode by either:
a. Pressing the channel button before the five-second delay, in
which case the radio recalls the „USE” and „STBY” frequencies
prior to entering the Channel Mode, or
b. Pressing the transfer button, so that the channel frequency
becomes the active frequency and the last „USE” frequency
becomes the new „STBY” frequency.
Note: If the optional remote channel increment switch is
installed, each activation of the switch will put the unit in the
Channel Mode and advance the channel number from the
previous channel used.
Note: If the optional remote channel increment switch is installed,
each activation of the switch will put the unit in the Channel Mode
and advance the channel number from the previous channel used.
1.
2.
3.
4.