User manual

Piper PA-31T Cheyenne X
Aerosoft GmbH 2007
72 73
72 73
KMA 28 Audio Panel Operation
Intercom Volume
Works as the power switch for the KMA 28 audio panel. Volume
selection is not modeled.
Receive Audio Selector
Routes the output from the selected receivers to the speakers. In this
release, COM1, COM2, NAV1,NAV2, MKR, ADF and DME are modelled.
When using Squawkbox 3 or any Squawkbox 3-compatible pilot client
for online flying, COM1 or COM2 are flashing when other stations are
transmitting on the selected radio channel.
Speaker Switch
Works in conjunctions with the standard or ANR sounds set. To receive
ident signals with the standard sound set, SPR needs to be active.
When the ANR sound set is used, ident signals are always received.
Transmit Indicator
Flashes when transmitting on COM1 or COM2 via voice. This
function is only active when using Squawkbox 3, or any Squawkbox
3 - compatible pilot client software for online flying. For further
information about Squawkbox 3, visit http://www.squawkbox.ca.