User manual

Table Of Contents

Piper PA-31T Cheyenne X

Aerosoft GmbH 2007

48 49

RMI-30 Radio Magnetic Indicator

1: VOR1 / ADF1 indicator needle

2: VOR2 / ADF2 indicator needle

3: VOR1 / ADF1 selector

4: VOR2 / ADF2 selector

5: HDG Warning Flag: Indicates a failure of

the gyro compass. This usually results from

the inverter not powering the gyro.

Course and heading information are sup-

plied to the RMI by the gyro compasses.

Inverter power is needed to operate the

gyros (for proper operation check inverter

and bus tie switches).

Astrotech LC2 Clock & Timer

The Astrotech LC2 works as both a clock

and a timer. Per default it is conﬁgured for

24hrs display.

1: Display (4 digits)

2: SET - RST Button

3: Mode-Button

4: ST/SP - DT/AV Button

The Mode-Button (3) switches between the modes „Clock“ and

„Timer. Timer mode is indicated by a ﬂag above the letters „Timer“. In

Timer mode the display (1) starts with minutes and seconds, switching

to hours and minutes when the ﬁrst hour is complete. Pushing the ST/

SP button (4) stops and continues the timer function. Pushing RST (2)

after ST/SP (4) resets the Timer to 0. When operating in clock mode,

the current date is displayed by pushing the DT/AV button (4).