User manual

14 15
14 15
Frequently asked
questions (FAQ)
VOR/GPS Switch operation:
As soon as the NAV1 radio is tuned to a valid ILS frequency, the VOR/
GPS switch changes to VOR and the autopilot to NAV ARM mode. If
a valid ILS frequency is in range, the autopilot will follow it´s localizer
beam. Valid ILS frequencies are between 108.10 and 111.95 and the
decimal part starts with an odd digit: 108.10, 108.15, 108.30, 108.35,
108.50, ..., 108.95, 109.10, 109.15, ..., 111.95.
Engine Start
You need to follow the engine start procedure as described (see PDF
on your CDROM). CTRL-E will not work.
Panel and cabin lights (virtual cabin)
Due to limitations in Microsoft Flight Simulator, the panel instruments
light and the virtual cabin light are tied together. They can´t be operated
independently.
Autopilot and flight director operation
Activation of the autopilot requires the flight director to be active.
Always check that you have turned on the flight director before activa-
ting the autopilot.
Trimble GPS airports, navaids and waypoints selection
Display of available airports, navaids and waypoints in the GPS is rest-
ricted to a 2000nm radius around your aircraft position.
Trimble GPS keyboard entry mode
If keyboard commands don´t seem to work at all, make sure SCROLL
LOCK is switched off, because all keyboard inputs will be intercepted
by the GPS as long as SCROLL LOCK IS ON.