User manual

Page 79
Aircraft Operation Manual
Piper Cheyenne I, IA, II, IIXL
For ight simulation use only
CALC
The Calculator mode shows a variety of data calculated by the GPS. This inclu-
des atmospheric and fuel data.
AUX
The Auxilliary mode is used to import ight plans from FSX.
D
�
The Direct key is used to activate a ight plan or y directly to a waypoint
ENT
The Enter key is used to conrm selections made with the concentric knobs
NRST
The Nearest key shows a list of the navigational points nearest to the aircrafts
current position.
MSG
The Message key displays the current status message from the GPS.
Keyboard Entry Mode
On the real Trimble, you can only select or enter waypoints by using the two
concentric knob. This is already hard to do, but it‘s even worse if it must be done
with mouse clicks. To make data entry more comfortable, we added a keyboard
entry mode which is activated by the SCROLL LOCK key. This key toggles the key-
board input mode on or off. As soon as it‘s on, „KBD“ will appear in the upper
right corner of the GPS display.
As an alternative to the SCROLL LOCK key, you can also use a click spot on the
data card between the AUX and NRST keys.