User manual

Page 78
Aircraft Operation Manual
Piper Cheyenne I, IA, II, IIXL
For ight simulation use only
User Interface
The Trimble Approach Plus is controlled by nine buttons and two concentric
knobs.
The Power Switch is located at the upper edge of the display. Use this switch to
switch the GPS on and off.
The Outer Knob is used to control the input cursor and to ip between display
pages.
The Inner Knob is used to select items
NAV
Switches the GPS to Navigation mode. This mode displays information about
the aircrafts position on its current route plus arrival times, fuel usage etc.
WPT
Switches the GPS to Waypoint Selection mode. This mode is used to select way-
points from the navigation database.
FPL
Switches to the Flight Plan mode. This mode is used to select stored or add new
ight plans.