User manual
Page 45
Aircraft Operation Manual
Piper Cheyenne I, IA, II, IIXL
For ight simulation use only
Flaps Position Indicator & Test Switch
1: Flaps position indicator needle
2: Test switch
3: Flaps position lever.
Flaps can be set to the following positions: 0°, 15°, 40°.
In the real aircraft, aps are innitely variable between 0° and
40°. Unfortunately, this cannot be simulated in MIcrosoft Flight
Simulator, and as this feature is not used under normal circum-
stances, it isn´t simulated in this package.
1
2
Ground Clearance Switch
Provides power to the audio panel, COM1 and NAV1 receivers
when pushed. Allows to receive ATIS and an IFR clearance wi-
thout the need to power up the aircraft completely. Avionics
Master Switch and Battery Switch need to be set to OFF for the
Ground Clearance Switch to function correctly. Ground clearance
mode is deactivated automatically when battery master or exter-
nal power are activated.
Static Pressure Source Switch
Abnormal readings of instruments supplied with static air could
indicate a restriction in the outside static air ports. An alternate
source is provided to supply static air to the pilot´s instruments
from inside the nose section.
Selecting the ALTERNATE SOURCE position of the static pressure
selector valve, disconnects the pilot´s instruments from their nor-
mal source and connects them to the alternate source.
3