User manual
Page 43
Aircraft Operation Manual
Piper Cheyenne I, IA, II, IIXL
For ight simulation use only
Astrotech LC2 Clock & Timer
The Astrotech LC2 works as both a clock and a timer. Per default
it is congured for 24hrs display.
1: Display (4 digits)
2: SET - RST Button
3: Mode-Button
4: ST/SP - DT/AV Button
The Mode-Button (3) switches between the modes „Clock“ and
„Timer. Timer mode is indicated by a ag above the letters „Ti-
mer“.
In Timer mode the display (1) starts with minutes and seconds,
switching to hours and minutes when the rst hour is complete.
Pushing the ST/SP button (4) stops and continues the timer func-
tion. Pushing RST (2) after ST/SP (4) resets the Timer to 0.
When operating in clock mode, the current date is displayed by
pushing the DT/AV button (4).
Vertical Speed Indicator (analogue)
1: VS needle, indicates climb/descend rate in feet/min x 100.
1
4
2
3
1
1
2
3
4
Altimeter
1: Altitude indicator needle
2: Pressure in millibars (QNH)
3: Altimeter pressure in Inches
4: Barometric pressure setting knob
Hint: The „B“ key in Microsoft Flight Simulator sets the altime-
ter to local pressure, or standard pressure, depending on the
aircraft´s altitude. The transistion altitude is dened as 18.000ft
worldwide.