User manual

Page 36

Aircraft Operation Manual

Piper Cheyenne I, IA, II, IIXL

For ight simulation use only

Vertical Speed Indicator & TCAS Display

1: Indicates climb or descend rate in ft/min x 100

2: Above/Level/Below selector. switches display of TCAS targets

between the areas above the aircraft (up to 9.999ft above and

2500ft below - „ABV“), at aircraft´s level (2.500ft above and

below „LVL“) and below the aircraft (up to 2500ft above and

9.999ft below - „BLW“). Only modes ABV and BLW are indica-

ted on the display.

3: TCAS range selector. Switches between 6nm and 12nm TCAS-

Range.

For a detailed reference about TCAS modes and operation, refer

to section TCAS (page 85).

Vertical Speed Indicator (analogue)

1: Indicates climb or descend rate in ft/min x 100

Radar Altimeter

1: Indicates altitude above ground up to 2.000ft, in ft x 100

2: Decision Height Selector

3: Decision Height warning indicator

4: Test button

5: Failure Warning Flag - Warns for unreliable indication. This

ag is displayed when avionics power is not available.