User manual

Page 12

Aircraft Operation Manual

Piper Cheyenne I, IA, II, IIXL

For ight simulation use only

NOTE: You can always use your mouse wheel to operate a multi-position switch.

Knobs with one level: Knobs are rotated left/right, or may be rotated completely

around. Left-click to rotate the knob to the left, and right-click to rotate the knob

to the right anywhere in the click spot. The cursor will be an unlled hand.

Some knobs also allow rotating them in larger steps. One example is the heading

bug, which may be rotated in steps of 1 or 10 degrees left or right. In this case the

cursor changes to a hand with „+” or „-” in it. When the cursor shows a „-”, the

knob will rotate to the left, while a „+” will rotate it to the right. Left-clicks will

rotate in low increments, while right-clicks will rotate in high increments.

Knobs with two levels: Some instruments contain knobs with an inner and an

outer ring. In this case, the click area is further divided into a left and a right

part. Clicks in the left half of the click spot rotate the outer knob, while the

right half adjusts the inner knob. Note that the operation rules for one-level

knobs still apply.

NOTE: You can always use your mouse wheel to rotate a knob.

hi lo