User manual

Aerosoft PBY Catalina 1.00 Manual
Page 94 of 100
D/T 2: Distance/Time 2 Page (D/T 2)
Fig15.3
The distance/time 2 page is used to display the distance and arrival time to the next active waypoint
and to the destination waypoint. In addition, the waypoint identifier and the sequential number of
each waypoint are listed for easy reference. Fig15.3 shows an example of the default D/T 2 page.
There are 6 lines of information.
• Line 1: The number on the left side of the line is the sequential waypoint number, and to the
right of it is the waypoint identifier of the next active waypoint.
• Line 2: Displays the distance to the next active waypoint in nm.
• Line 3: Displays the estimated arrival time to the next active waypoint under the current
flight conditions. The format is hrs:min.
• Line 4: The number on the left side of the line is the sequential waypoint number, and to the
right of it is the waypoint identifier of the destination waypoint.
• Line 5: Displays the distance to the destination waypoint in nm.
• Line 6: Displays the estimated arrival time to the destination waypoint under the current
flight conditions. The format is hrs:min.
D/T PAGE 2 WITH FLP 0:
Fig 15.3