User manual
Table Of Contents
- PBY Catalina
- Introduction
- System requirements
- Credits
- Copyrights
- Contact support
- Models and versions
- Limitations
- Failure model and special features
- Aerosoft Sound Control
- Flight model
- Using the switches and knobs
- Interactive Checklist
- Avionics, 1940’s military cockpit
- Avionics, modern cockpit
- Engine Settings
- Mission
- Appendix A: Simplified checklist
- Appendix B: KX 165A TSO
- Appendix C: KLN-90B User Manual
- INTRODUCTION
- OVERVIEW
- DEFINITIONS:
- SYSTEM USE
- NAV: NAVIGATION PAGES
- CALC: CALCULATOR PAGES
- STAT: STATUS PAGES
- SETUP: SETUP PAGES
- OTHER: OTHER PAGES
- TRIP: TRIP PLANNING PAGES
- MOD: MODE PAGES
- FPL: FLIGHT PLAN PAGE
- NAV: NAVIGATION PAGES (right screen)
- APT: AIRPORT PAGES
- NEAREST Airport Pages
- VOR: VOR Page
- NDB: NDB Page
- INT: INTERSECTION PAGE
- SUPL: SUPPLEMENTAL PAGE (SUP)
- CTR: CENTER WAYPOINT PAGE
- REF: REFERENCE WAYPOINT PAGE
- ACTV: ACTIVE WAYPOINT PAGE (ACT)
- D/T: DISTANCE/TIME PAGES
- MESSAGE PAGE
- DIRECT-TO PAGE
Aerosoft PBY Catalina 1.00 Manual
Page 49 of 100
SUPER NAV 5: Super Navigation 5
Fig 1.11
Fig 1.12
Fig 1.13
The super navigation 5 page is displayed when the NAV 5 page is chosen from both left and right
page groups at the same time. This page provides the user with basic relevant navigation data
displayed in the context of a moving map. The information displayed on the map is exactly the same
information displayed on the NAV 5 page, and the range and clutter can be changed as discussed. On
this page however, the map is larger and the range factor is displayed at the lower left of the map.
All of the data contained on the map is informative only and the values cannot be changed by the
user directly (except for the range factor).
Figs 1.11-1.13 show examples of the super navigation 5 page. There are 7 lines of navigational
information. The information displayed in the first 4 lines cannot be changed, however the