User manual
Table Of Contents
- PBY Catalina
- Introduction
- System requirements
- Credits
- Copyrights
- Contact support
- Models and versions
- Limitations
- Failure model and special features
- Aerosoft Sound Control
- Flight model
- Using the switches and knobs
- Interactive Checklist
- Avionics, 1940’s military cockpit
- Avionics, modern cockpit
- Engine Settings
- Mission
- Appendix A: Simplified checklist
- Appendix B: KX 165A TSO
- Appendix C: KLN-90B User Manual
- INTRODUCTION
- OVERVIEW
- DEFINITIONS:
- SYSTEM USE
- NAV: NAVIGATION PAGES
- CALC: CALCULATOR PAGES
- STAT: STATUS PAGES
- SETUP: SETUP PAGES
- OTHER: OTHER PAGES
- TRIP: TRIP PLANNING PAGES
- MOD: MODE PAGES
- FPL: FLIGHT PLAN PAGE
- NAV: NAVIGATION PAGES (right screen)
- APT: AIRPORT PAGES
- NEAREST Airport Pages
- VOR: VOR Page
- NDB: NDB Page
- INT: INTERSECTION PAGE
- SUPL: SUPPLEMENTAL PAGE (SUP)
- CTR: CENTER WAYPOINT PAGE
- REF: REFERENCE WAYPOINT PAGE
- ACTV: ACTIVE WAYPOINT PAGE (ACT)
- D/T: DISTANCE/TIME PAGES
- MESSAGE PAGE
- DIRECT-TO PAGE
Aerosoft PBY Catalina 1.00 Manual
Page 38 of 100
OVERVIEW
The KLN 90B GPS Navigation System contains a wealth of aeronautical information. This information
is presented on the display screen in the form of "pages". Each page contains specific and related
information presented in a specific format. Related information pages are grouped into 17 page
"types", and most are further divided into related sub-groups to give over 50 different information
pages. The information contained in these pages includes fuel and air data, lateral and vertical
navigation, unit conversions, flight and trip planning, and direct-to navigation, to name a few. In
addition, there are 9 pages each of the nearest airports, VORs, and NDBs. A zoomable, moving map
is also presented as a page.
DEFINITIONS:
1. LEFT DISPLAY SCREEN: Displays the current left group page information.
2. RIGHT DISPLAY SCREEN: Displays the current right group page information.
3. POWER/BRT/DIM KNOB: Used to turn the unit on and off, and to adjust screen brightness.
Click on the knob to turn power on/off. Click to the right of the knob to increase screen
brightness, and to the left to decease it.
4. RIGHT CURSOR BUTTON: Initializes data entry mode to allow data entry into the right group
pages. A background rectangle highlights the value to be changed. Except for the right NAV
type page, the RIGHT INNER KNOB must be "in" for this button to function. Also used to exit
the data entry mode. The letters CRSR are displayed in place of the page type name and
number when the cursor function is on.