User manual

Aerosoft H36 Dimona X 1.00 Manual
Page 8 of 21
Once an identifier is recognised, it will
show facility name and nearby city - if
possible. Press ENTER and the GPS will
return to the Map page with the flight
plan leg from the current aircraft position
to the selected identifier. As everywhere
using the QUIT button will halt the action
and return to the MAP screen.
CURSOR MODE
Another option to make a DIRECT-TO flight
plan, is with the help of the “Cursor Mode”.
When the GPS is in map mode, pressing
either the UP / DOWN / LEFT or RIGHT
cursor key, will put the GPS into “Cursor
mode”. A small cursor (blinking circle) will
appear instead of the aircraft symbol.
Using the cursor keys the circle can be
moved on the map and the map will center
on the cursor position. A line will be drawn
from current aircraft position to the cursor.
Press ENTER to select the cursor position as a Direct-To flight plan. If the ENTER button is not pressed
within a few seconds or by pressing QUIT, cursor mode will be suspended and the GPS will return to
Map mode. By using the cursor mode any global position can be selected as a waypoint. This is the
easiest way to make a flight plan, certainly if the desired waypoint isn´t too far away.
TIP: In cursor mode finer adjustments can be made by zooming in on the map first.