User manual

FSMap
Aerosoft GmbH 2008
58 59
58 59
The FSMap instrument as a TCAS
display
Your own aircraft position will appear in the middle of the screen,
represented by a small triangle. Two range rings will represent the
current display range, and the halfway distance. The display range may
be adjusted using the “In” and “Out” SFKs, or by turning the rotary
knob. You may also adjust the range by using the mouse wheel when
the mouse cursor is overhead the rotary knob or the appropriate SFKs.
The SFK “Vert” will cycle through the different vertical TCAS display
modes:
Above: 9000ft above / 2700ft below•
Normal: 2700ft above / 2700ft below•
Below: 2700ft above / 9000ft below•
Unrestricted: No altitude restrictions apply•
The selected vertical mode is indicated in the lower right corner of the
display. Please note that the vertical mode may also be defined via the
TCAS display option menu (see below).