User manual

52 53
52 53
Menu level „Nav“
Distance Units: Nautical miles (nm) or kilometer (km)
Altitude Units: Feet (Feet/ft) or meter
Speed Units: Knots (kt), kilometers per hour (km/h) or miles per hour
Baro Units: Millibar (european) or In.Hg. (american)
Temperature Units: Celsius or Fahrenheit
TCAS Altitude (ft): The trigger altitude for TCAS warnings. Choose
from 500ft to 2500ft. Default value is 1200ft.
TCAS Range (nm): The trigger range for TCAS warnings. Choose
from 5.0nm to 12nm. Default value is 6.0nm.
Ground Traffic Altitude (ft): The trigger altitude to display ground
traffic. Choose from 0ft - 5000ft. Default value is 1000ft.
Ground Traffic Range (nm): The trigger range to display ground
traffic. Choose from 0nm - 14nm. Default value is 10nm.
Aircraft Symbol: Defines the symbol for your own aircraft in map
mode. You may choose between “Jet” and “Prop” aircraft with one or
two engines.
Initial Enroute Zoom (nm): The initial map zoom when the map
display changes from ground to enroute charts.
Initial Ground Zoom (nm): The initial map zoom factor after gauge
startup, when the aircraft is on the ground.
Transition Speed (kts): The speed where the FMap instrument swit-
ches from ground charts to enroute charts. The value should ideally
match your takeoff speed.
SmartZoom Minimum Scale (nm): Smallest zoom factor for which
the SmartZoom function is working. Choose from 0.2nm to 1500nm,
with the maximum being the value for „SmartZoom Maximum Scale“
(see below).