User manual

40 41
40 41
Edit the FSMap instrument properties
When the FSMap instrument is selected in a panel window, you may
define some advanced parameters for the instrument. To do this, right-
click on the instrument, and select “Edit Properties” from the pop-up
menu. The parameters will be added to the FSMap gauge entries in
the relevant PANEL.CFG file.
The following parameters can be defined:
Window identifier: Assigns a numerical identification number to the
FSMap instrument. This number is assigned by the FSMap application
by default, and doesn’t need to be changed manually. The default
value is 14472.
Configuration name: Allows you to assign a specific name for this
instrument. All settings made in the FSMap instrument are saved to a
single configuration file. Setting an individual name here allows you to
save settings specifically for this particular instrument only.
Window position on startup: Defines where the instrument will
appear on the screen when called the first time.