User manual

FDC Live Cockpit! 2011

Aerosoft GmbH 2010

Gear Down call will be made at that altitude instead.

•TheFlap15callshouldbemadedependingontheairspeedof

the aircraft, but all subsequent ﬂap calls should be made

dependent on the altitude of the aircraft as well. To achieve this,

select the option at the bottom of the panel that is beneath the

F15 column.

•Intheaptoaltitudetableatthelowerleftofthepanel,enter

the minimum altitudes at which to call the remaining ﬂap

positions F25, F30, and F40. The values should be 2100, 1800,

and 1500 respectively. Double-click each cell to enter the value.

•ClickSavetosavetheperformancele.Youwillbeaskedto

enter a suitable ﬁle name.

Note! Since the default performance ﬁle for the Boeing 737-400

is much more detailed than the one we have created in this

example, we suggest that you skip this step, and close the

Performance Editor without saving.

•ClickClosetoclosethePerformanceEditor.

Congratulations on ﬁnishing your ﬁrst performance ﬁle in FDC Live

Cockpit! 2011