User manual

87
Adding a picture for your aircraft
You can add a picture for your new aircraft as well. This picture will
be displayed in the Main Options panel when your aircraft is
selected. The image must be located in the Pics folder of the FDC
Live Cockpit! 2011 installation, and must be saved with the same
name as the performance file you created. If, say, the performance
file is named MyAircraft, you should save the image as MyAircraft.
gif. Although FDC Live Cockpit! 2011 will display a larger image, we
suggest that you use an image size of approximately 300 x 110
pixels.
If you don’t include a custom picture for your aircraft, the default
image stating that no image could be found for this aircraft will be
displayed.
Creating a performance file
for the Boeing 737-400 (part III)
•ClickLandingtoopenthelandingdatasection.
•Inthetable,enterthelandingdatapresentedbelow.
W F1 F2 F5 F10 F15 F25 F30 F40
154 235 000 225 215 187 168 159 155
121 207 000 198 190 166 148 141 137
000 165 000 158 151 133 117 111 109
Add rows to the table by clicking Add, and double-click each cell to
enter a new value.
Note that the weight appears in descending order, with higher
weights at the top of the table. Note also that the speed decreases
for each flap call being made. The F2 call will not be made, since its
speed is set to ‘000’.
•SincetheGearDowncallshouldoccurtogetherwiththeFlap
25 call, select the option directly beneath the F25 column. Leave
the value in the ‘Gear Down’ Altitude box at ‘0’, or otherwise the