User manual

FDC Live Cockpit! 2011
Aerosoft GmbH 2010
70
Opening the Checklist Editor in
FDC Live Cockpit! 2011
•IntheFDCLiveCockpit!2011mainwindow,clickOptions.
•IntheMainOptionspanel,clickChecklistEditor.
The Selections panel
When you set out to create a new set of checklists for an aircraft, you
can either start with a blank set of checklists, edit a previously created
set of checklists, or you can use one of the default checklists as checklist
templates. To edit a previously created checklist set, click Edit and select
the checklist set to edit. To base your checklist set on a template, click
Templates and select the checklist set to use as a template.
Note! You can easily clear all the selections you have made by
selecting the top entry of the Checklist Section drop down box. The
entry is named Clear ALL Sections. You will be warned before FDC
Live Cockpit! 2011 clears all the selections, to prevent you from
accidentally resetting your work!
To select calls for your checklist, follow the procedure below.
•Selectthechecklistyouwanttoeditinthedropdownbox.
Options are Pre-start, Before Pushback, Before Start, After Start,
Taxi, Before Takeoff, After Takeoff, Climb, Descent, Approach,
After Landing, and finally Parking checks. As the selection of the
drop down box changes, the calls you can select will change in
the list below.
•Selectthecallsyouwishtobemadebyselectingtheiroptions
in the list. Note that if you select one or more calls in the list, the
main calls (at the top and bottom marked with >>> and <<<) are
selected automatically. This indicates that the checklist is activa-
ted, and that the opening call (such as „Pre-start Checklist“) and
finishing call (such as „Pre-start Checklist Complete“) will be
made. You should also note that the list contains calls for both jet
and turbo-prop aircraft, so be careful to select calls that are
supported by your aircraft!