User manual

33
Interactive checklist calls
FDC Live Cockpit! 2011 will control many of the checklist calls made.
Thus, if the item of a checklist call is not set correctly, you will get a
negative response for the call. You can specify the length of the delay
yourself, allowing you the time to avoid the negative call by correcting
the item. If you receive a negative response, the checklist will be
temporarily paused. When you have corrected the checklist item, you
must manually resume the checklist again. The call will be made
again to ensure that the response is positive, before the checklist is
advanced further.
You can turn off all checklist interactivity by turning off the Interactive
Checklist Master Switch on the Select Aircraft options panel. All
checklist calls that have the reply set to Call Actual Setting will not
have a reply at all.
Note! Interactive checklist calls are unfortunately not available if you
are using FDC with Microsoft Flight Simulator 98.
To change the checklist mode:
•IntheFDCLiveCockpit!2011mainwindow,clickOptions.
•Inthemainoptionspanel,clickSelectAircraft.
•Underthechecklistsectionontherightofthepanel,selectthe
checklist mode you would like to use; Auto, Semi-Auto, or
Manual.
•ClickSaveChangesandthenOKtoexitthepanel.
To change the negative response delay:
•IntheFDCmainwindow,clickOptions.
•Inthemainoptionspanel,clickSelectAircraft.
•Underthechecklistsectionontherightofthepanel,enterthe
number of seconds for the delay in the Delay box.
•ClickSaveChangesandthenOKtoexitthepanel.