User manual

17
A note on connecting in mid-flight
If you attempt to establish a connection between Flight Simulator
and FDC Live Cockpit! 2011, FDC Live Cockpit! 2011 will handle this
in two ways:
•Ifyouareabove3000MSLwhenconnecting,FDCLiveCockpit!
2011 will automatically assume the next flight phase will be the
Cruise phase. The next checklist will be the Climb checks.
•Ifyouarebelow3000MSLwhenconnecting,FDCLiveCockpit!
2011 will assume that the next flight phase will be the Climb
phase. The next checklist will be the After Takeoff checks.
Hotkeys in FDC Live Cockpit! 2011
You are not required to remember many hotkeys when using FDC
Live Cockpit! 2011. There are, however, a few that are useful to
remember. The hotkeys and their actions are summarized in the table
at the bottom of the page.
Changing hotkeys
You can easily change the hotkeys in FDC Live Cockpit! 2011:
•IntheFDCLiveCockpit!2011mainwindow,clickOptions.
•IntheMainOptionsPanel,clickHotkeySetup.
•IntheHotkeySetuppanel,selectthehotkeyyouwouldliketo
change in the Current Hotkeys list on the left.
•ClickChangeHotkey.
•Hitthekey(s)youwishtouse,andclickAssign.
•Conrm(orreject)thechange.
Note! The hotkey setup is not saved when you save a profile.
You find a summary of hotkeys on the next page.