User manual

Discus Glider X
Aerosoft GmbH 2009
40
Aerosoft Sound Control
This aircraft is equipped with Aerosoft Sound Control that enhances
the sound options of this aircraft in FSX. Depending on the product up
to 200 additional sounds can be added. ASC is based on a special
gauge that is loaded from the PANEL.cfg and is controlled by an ASC.
cfg file in the panel folder. The module is linked to the aircraft and we
added it with an ID code. Should you see an error that the module
does not recognize the aircraft, please contact us on support@
aerosoft.com.
The module should not conflict with any other FSX product and the
sounds are always expanding the aircraft and not the simulated pilot,
ATC or external environment. Of course the module can be disabled
by commenting the load line (adding // in front of
gauge**=ASC!MAIN, 0,0, 10, 10, 1 in the panel.cfg)
If you get an error pointing to this module it is most likely caused by a
problem related to Microsoft.VC90.CRT.It is known that some people
got a problem in the C++ 2008 runtime files. You can find a correct
set here: http://www.microsoft.com/downloads/details.
aspx?FamilyID=9b2da534-3e03-4391-8a4d-
074b9f2bc1bf&displaylang=en
Flight model
The flight model has been one of the focal points of this project and
has in fact been started three times because though good it was not
as perfect as we wanted it to be. We can honestly say that the 5 flight
models in this product are state of the art, allowing you to fly the
gliders EXACTLY as the real gliders. Stall, spins, side slips, they are all
exactly as they should be. There are a good number of pilots who have
flown the real Discus gliders that have also flown this simulated model
and can confirm that.