User manual
Table Of Contents
- 1: Cover
- 2: Cover Back
- 3: Introduction
- 4: Development Team
- 5: Installation
- 6: Configuration
- 7: Menus
- 8: Operation Mode
- 9: Initiation Mode
- 10: Controls
- 11: Effects Lighting and Sounds
- 12: Effects Vibrations
- 13: Preflight
- 14: Ground Equipment
- 15: Walkaround Check
- 16: Trimtabs
- 17: Oil Liquids
- 18: Payload
- 19: Maintenance
- 20: Equipment
- 21: Workshop
- 22: Service
- 23: Instructor
- 24: Instructor General
- 25: Engine and Liquids
- 26: Fuel System
- 27: Electrical System
- 28: Handling
- 29: Handling Concepts
- 30: Handling Concepts
Neither the software nor the documentation may
be used for real aviation and training purposes.
01<09
page
1.5
ADD-ON OPERATION
DA20-100 ‘Katana’ 4X Manual
1.5.1
4X MENU (SHIFT+3)
The SHIFT+3 keyboard shortcut opens the 4X
Menu to handle all those actions and options
that can not be set from the pilots seat.
The first three entries will open submenu icons
to handle further windows.
This menu offers options for preparing the
aircraft before your flight, refueling and
cleaning. Only available with parked aircraft.
Preflight
Maintaining the aircraft, servicing and
changes of the equipment. Only available with
parked aircraft.
Maintenance
These windows are only available if the add-
on is operated in Instructor Mode and offer
the possibility to influence the aircraft systems
with a mouse click.
Instructor
All settings on how to use the add-on can be
selected here, including effects and operation
modes.
Settings
INTRODUCTION AND DESCRIPTION