User manual
Table Of Contents
- 1: Cover
- 2: Cover Back
- 3: Introduction
- 4: Development Team
- 5: Installation
- 6: Configuration
- 7: Menus
- 8: Operation Mode
- 9: Initiation Mode
- 10: Controls
- 11: Effects Lighting and Sounds
- 12: Effects Vibrations
- 13: Preflight
- 14: Ground Equipment
- 15: Walkaround Check
- 16: Trimtabs
- 17: Oil Liquids
- 18: Payload
- 19: Maintenance
- 20: Equipment
- 21: Workshop
- 22: Service
- 23: Instructor
- 24: Instructor General
- 25: Engine and Liquids
- 26: Fuel System
- 27: Electrical System
- 28: Handling
- 29: Handling Concepts
- 30: Handling Concepts
Neither the software nor the documentation may
be used for real aviation and training purposes.
01<29
page
DA20-100 ‘Katana’ 4X Manual
1.8.3
INSTRUCTOR - ELECTRIC CIRCUITS
The drawing of the Electric System is interactiv: switches and
circuitbreakers can be set by a right click and the charge of the battery can
be changed by dragging the status bar.
1.8.4
INSTRUCTOR - AVIONICS AND INSTRUMENTS
The pitot and and static system, gyros and avionics can be set to Fault or
back to Ok by clicking the corresponding boxes.
INTRODUCTION AND DESCRIPTION