User manual
Table Of Contents
- 1: Cover
- 2: Cover Back
- 3: Introduction
- 4: Development Team
- 5: Installation
- 6: Configuration
- 7: Menus
- 8: Operation Mode
- 9: Initiation Mode
- 10: Controls
- 11: Effects Lighting and Sounds
- 12: Effects Vibrations
- 13: Preflight
- 14: Ground Equipment
- 15: Walkaround Check
- 16: Trimtabs
- 17: Oil Liquids
- 18: Payload
- 19: Maintenance
- 20: Equipment
- 21: Workshop
- 22: Service
- 23: Instructor
- 24: Instructor General
- 25: Engine and Liquids
- 26: Fuel System
- 27: Electrical System
- 28: Handling
- 29: Handling Concepts
- 30: Handling Concepts
DA20-100 ‘Katana’ 4X Manual
The drawing of the Fuel System is interactive and can be influenced
directly. The fuel content can be set by dragging and valvues and pumps
can be clicked. The fuel pipes will be colored to show if there is fuel running
through them.
The Conditions of Pumps and the Filter can be be set by dragging the
status bar or by using the +/- buttons. Additionally, the contamination by
water can be adjusted in the same way. Clicking the Draining Water bar will
drain away accumulated water at the bottom of the tank. Clicking a bar with
the right mouse button will repair the corresponding system.
Neither the software nor the documentation may
be used for real aviation and training purposes.
01<28
page
INTRODUCTION AND DESCRIPTION