User manual
Table Of Contents
- 1: Cover
- 2: Cover Back
- 3: Introduction
- 4: Development Team
- 5: Installation
- 6: Configuration
- 7: Menus
- 8: Operation Mode
- 9: Initiation Mode
- 10: Controls
- 11: Effects Lighting and Sounds
- 12: Effects Vibrations
- 13: Preflight
- 14: Ground Equipment
- 15: Walkaround Check
- 16: Trimtabs
- 17: Oil Liquids
- 18: Payload
- 19: Maintenance
- 20: Equipment
- 21: Workshop
- 22: Service
- 23: Instructor
- 24: Instructor General
- 25: Engine and Liquids
- 26: Fuel System
- 27: Electrical System
- 28: Handling
- 29: Handling Concepts
- 30: Handling Concepts
DA20-100 ‘Katana’ 4X Manual
1.8.2
INSTRUCTOR - ENGINE AND FUEL
The Engine Condition can easily be set by dragging the condition bar or by
using the +/- buttons.
Different systems of the engine can be set to Fault or back to Ok by clicking
corresponding box. As well as the carburetor can be Iced and Deiced with a
single click.
The content of the Oil and Cooland Liquid
reservoirs can be changed by dragging the
content bars or clicking the +/- button.
At the bottom there it is possible to engage
and set a Leak for each system. It can be
adjusted by dragging the value display or by
clicking the +/- buttons. A right click on the bar
will set the optimum filling level.
Neither the software nor the documentation may
be used for real aviation and training purposes.
01<27
page
INTRODUCTION AND DESCRIPTION