User manual
Table Of Contents
- 1: Cover
- 2: Cover Back
- 3: Introduction
- 4: Development Team
- 5: Installation
- 6: Configuration
- 7: Menus
- 8: Operation Mode
- 9: Initiation Mode
- 10: Controls
- 11: Effects Lighting and Sounds
- 12: Effects Vibrations
- 13: Preflight
- 14: Ground Equipment
- 15: Walkaround Check
- 16: Trimtabs
- 17: Oil Liquids
- 18: Payload
- 19: Maintenance
- 20: Equipment
- 21: Workshop
- 22: Service
- 23: Instructor
- 24: Instructor General
- 25: Engine and Liquids
- 26: Fuel System
- 27: Electrical System
- 28: Handling
- 29: Handling Concepts
- 30: Handling Concepts
DA20-100 ‘Katana’ 4X Manual
Neither the software nor the documentation may
be used for real aviation and training purposes.
01<26
page
1.8.1
INSTRUCTOR - GENERAL
The upper area of the General Window displays the aircrafts position and
speed and informations about the enviroment and wind.
The Aircraft Status can be set with a single click on the different status
boxes. The correspondant box will be colored blue for a active setting
process and stays green for a few moments if the status has been
successfully set. This will only affect aircraft settings, not the position,
airspeed etc.
The Systems Status can be fixed easily with the the three boxes on the
right. Within a second all systems can be repaired, liquids are refilled or the
battery recharged.
INTRODUCTION AND DESCRIPTION