FMS Guide

Aerosoft – Digital Aviation

CRJ-700 CRJ-900

FMS Guide

Revision Info

VOL

1-1-30

23-Apr-2017

FPLN PAGE

Entering a flightplan finally starts on the FPLN page. It follows a certain sequence of steps through different

subpages:

1. Enter Origin

2. Enter Destination

3. Enter Origin Runway

4. Enter Alternate airport

5. DEP/ARR

a. Enter a SID

b. Enter a STAR

6. Enter route according route string

7. Check / modify route on LEGS page

8. Check / modify speed / altitude restrictions

But lets start on page 1 of the FPLN page:

FMS_49.jpg

• ORIGIN / DIST

Enter the origin airport in IATA code (4 letters) into the scratchpad and then copy it by pressing LSK 1L

into the ORIGIN field.

As soon as a route is entered, the distance from origin to destination is displayed below the DIST

headline

• DEST

Enter the destination airport in IATA code (4 letters) into the scratchpad and then copy it by pressing

LSK 1R into the DEST field.

• ROUTE

In case you already saved a route, you may load a route directly by entering the name it was saved

under into the scratchpad and then copy it into LSK 2L

• ALTN

Enter the alternate airport in IATA code (4 letters) into the scratchpad and then copy it by pressing

LSK 2R into the ALTN field.