User manual

Bronco X
Aerosoft GmbH 2012
78 79
TRIM SYSTEMS FAILURE
2. TRIM SELECT
ALT
3. ALTERNATE TRIM SWITCHES
TRIM, AS REQUIRED
PROPELLER/ENGINE OVERSPEED
1. POWER LEVER
RETARD
2. AIRSPEED
DECREASE
3. PITCH
INCREASE ATTITUDE
4. CONDITION LEVER
FEATHER & FUEL SHUT-OFF
ENSURE POWER LEVER IS IN FLIGHT IDLE.
CANOPY OPEN IN FLIGHT
1. AIRSPEED
REDUCE TO 90 KIAS
2. FLAP HANDLE
T/O
3. CANOPY
CLOSED, IF POSSIBLE
4. APPROACH SPEED
10 KIAS ABOVE NORMAL
STRUCTURAL DAMAGE
1. DETERMINE AIRSPEED AT WHICH CONTROL EFFECTIVENESS IS
MARGINAL IN LANDING CONFIGURATION.
2. ESTABLISH AIRSPEED AT LEAST 10 KIAS HIGHER.
EMERGENCY JETTISON
METHODS OF JETTISON ARE AS FOLLOWS:
1. ALL EXTERNAL STORES, STORES
EMER REL BUTTON
PUSH
2. STATIONS 1, 2, 4, 5, EMER ST
JETT HANDLE
PULL