User manual

Bronco X
Aerosoft GmbH 2012
62 63
STARTING ENGINES
1. BRAKES
SET
2. PROPELLER
CLEAR
3. STARTER
START
4. START IGNITION LIGHT ON
CHECK
5. CONDITION LEVER
NORM FLT 10% RPM
IF NO LIGHT-OFF WITHIN 15 SECONDS, ABORT START MONITOR
EGT (815°C MAXIMUM) AND RPM AT 50% TO 53% RPM CHECK:
6. OIL PRESSURE INDICATION
CHECK
7. START IGNITION LIGHT OUT
CHECK
8. EGT/T. I. T. SHIFT
CHECK
9. FUEL BOOST LIGHT OUT
CHECK
10. RPM
STABILIZE APPR. 85%
11. PROPELLER
UNLOCK
SMOOTHLY RETARD POWER LEVER TO REVERSE RANGE AND
NOTE INCREASE IN TORQUE, THEN RETURN TO GROUND START
12. RPM
STABILIZED APPR. 67%
13. OIL PRESSURE
50 PSI MINIMUM
PRIOR TO START 2ND ENGINE, CHECK VOLT FOR <75 AMPS
14. REPEAT STEPS 2 THROUGH 7 FOR OTHER ENGINE
AFTER BOTH ENGINES ARE STARTED:
15. EXTERNAL POWER
DISCONNECT (IF APPL.)
16. GENERATOR CAUTION LIGHTS
OUT