User manual

42 43
Click the checklist header (like “COCKPIT CHECK”) and a red check-
mark will indicate that the checklist has been started, but not finished
correctly yet. Now click each checklist item and a checkmark will
indicate whether it is set correctly or not. If it has been set correctly a
green checkmark will be shown and a voice will also confirm the item
is checked (or the action performed) and the item is completed. If the
checkmark is red you have two options. Either you can manually
correct the issue or right click the checklist item to have it done for
you. This is especially useful if you have not yet fully mastered the
aircraft and find it hard to find all the switches.
The moment the checklist has been completed the checkmark at the
top will turn green and the voice will tell you the checklist is com-
pleted. If you like to start over, use the CLEAR CHECKLIST option.