User manual

30 31
Aerosoft GPS Unit
The GPS instrument has its own internal battery so it can be used
when the Master switch is still off. It’s charged by the Primary DC
electrical bus when the Battery master switch is on. To turn the GPS
on, press the button with the red logo and the start-up screen will be
displayed.
CAUTION: The framerate of the sim is affected by the amount of
details shown!
Map Mode
After initialization the GPS will be in Map Mode showing an aircraft
symbol in the centre of a map. North is always up. In the four corners
of the display, current ground speed, distance to next waypoint,
estimated time to next waypoint and a pointer depicting relative
bearing to the next waypoint are shown. If the pointer points up, the
aircraft is heading straight towards the next waypoint.