General Guidelines
Aerosoft
Airbus
A318/A319/A320/A321
The Airbus A318/A319/A320/A321 In FSX
General guidelines
Vol
1
01-03-16
21 October 2015
VOLUME: On the volume control page you can adjust your individual background noises and other
audio elements. Keep in mind that the Airbus Cockpit is a noisy environment. In cruise you will
hardly hear the engines and wind noise over the noise the cooling fans that keep the electronics
cool! Changes made are kept for your next flight. If you like your own default settings ask us on the
forums and we’ll be glad to assist. VIEWS
VIEWS
VIEW SYSTEM: There is a simple yet effective way to switch your views using small icons in the
view bar. You open the view bar by clicking the grey triangle in the upper right (or left) corner. If
you do not like this, or you are using another viewing add-on you can disable the whole viewing
system here.
PANEL BAR: Toggles the viewing selection of panel views.
WINGVIEW BAR: Toggles the viewing selection of wing views.
VIEW MODE: Here you can select if the panel views should be seen from a realistic angle or a
straight on, not very realistic, viewpoint.
POSITION: Toggles between a horizontal or vertical layout.
SOUND: There is a small sound effect added to any view changes, you can disable it here.
CHECKLIST
CHECKLIST: You can toggle the complete checklist system on or off here.
COPILOT: n combination with the CHECKLIST function the “Copilot” works timely aligned with the
checklist i.e. performs his duties when the task should be done according to the checklist
INFO BAR: If you want you can get additional instructions at the top of the screen. Certainly for
beginners we strongly advise this option activated.
HOTKEYS: Many of the interactions with the checklists can be done with key command if you so
desire.
AES PUSH: If you own AES you want to use its advanced push back system. If not you can use the
build in push back.
APP SPD LMTR (APPRAOCH SPEED LIMITER): If you want the co-pilot to warn you about high
speeds on approach activate this option.
250 KTS LMTR (250 KNOTS LIMITER): If you like to be warned if you exceed 250 Knots IAS below
FL100 activate this option.
FL DATA REC (FLIGHT DATA RECORDER)
Included in this product is an advanced Digital Flight Data Recorder that records all your flights (see the
special chapter on that). You can toggle the activation of this module here.
FLIGHT
PAUSE AT TOP (PAUSE AT TOP OF DESCENT: Pauses the simulator app. 10 NM before the point the
MCDU switches from cruise to descent mode.
PAUSE AT NEXT WP (PAUSE AT NEXT WAYPOINT): Will pause the simulator the moment you reach
the next waypoint on your flight plan.