General Guidelines

Aerosoft

Airbus

A318/A319/A320/A321

The Airbus A318/A319/A320/A321 In FSX

General guidelines

Vol

01-03-11

21 October 2015

TOOLS

There are several tools provide with the Airbus. The RAAS is configured from inside FSX (via the ADDON |

RAAS dropdown menu) and the Fuel Planner and the Flight Data Recorder can be started from the

Windows Start Menu |Aerosoft | Airbus A318_A319.

AIRBUS A320_A321 CONFIGURATOR

The configuration allows you to configure the product before starting it.

NAVIGATION DATA SOURCE: Allows you to select either NavDataPro (Lufthansa data) or Navigraph if that

is installed.

FADEC: Please make sure you select the right configuration here.

LOGGING: While useful for debugging it van affect performance and we suggest to keep it all off unless

requested.

Performance: On some hardware (laptops) the ECAMs will not show. Setting this option will move the

drawing actions from the GPU to the CPU.

ND (Navigation Display): Offer opportunities to reduce the amount of drawn elements.

MCDU: Allows configuration of the MCDU options

FS2CREW: Allows you to activate or FS2Crew (assuming it is installed)

Voice Packs & Lighting: Allows you to select the voice for PF (Pilot Flying) and PM (Pilot Monitoring) and

allows the user to change between two VC light levels. The brighter one (default) is easy on the eye and

cheaper monitors, the darker one is a bit more realistic but might be hard to use on non-calibrated

monitors.

Note: If you install a 3

party livery you will have to remove the

AIRBUSX_V2_VC_MAINPANEL_L file from it or it will overwrite the darker option!