User Manual in P3D

A318/A319/A320/A321
Professional
The A318/A319/A320/A321 In P3D
Vol
1
01-03-41
16 April 2019
MAKING THE TILLER FUNCTIONAL
On the ground (at speeds under 60 knots) you steer the aircraft with the
‘tiller’. This function the same as a steering wheel in a car. We tried
controlling this with the mouse for additional realism but were not happy
with the results. So as with all aircraft you use the rudder to steer the
aircraft. However, it is now also possible to use a unused control axis
(rotary control) on your steering hardware. The tiller axis is connected to
the P3D Engine 3 Throttle axis. You can use the SETTINGS-CONTROLS of
P3D to assign one of the controls on your hardware to this axis.
Pressing the center button (marked PEDAL DISC) will disconnect the
rudder from the nose wheel. Press it again and the nose wheel will
connect to the rudder again.