User Manual in P3D

A318/A319/A320/A321
Professional
The A318/A319/A320/A321 In P3D
Vol
1
01-03-28
16 April 2019
The MCDU allows you to store flight plans as ‘company routes’. The saving and loading of company routes
is done via the left MCDU. Press the MCDU MENU button to access these options. These company routes
are very useful when an aircraft flies the same route day after day. A company route consists of the
departure and arrival airport plus the routing. It does not contain the runway and SID/STAR because those
can differ (for example because of the wind). The route is made up of waypoints and the airway name
between them: AIRPORT > WAYPOINT > ROUTE > WAYPOINT > ROUTE,…., WAYPOINT > AIRPORT
Now an actual flight starts on a runway, then follows a SID (Standard Instrument Departure) before
following airways to the destination. Close to the destination you follow a STAR (Standard Terminal Arrival
Route) to the runway: RUNWAY > SID > WAYPOINT > ROUTE > WAYPOINT > ROUTE,…., WAYPOINT > STAR
> RUNWAY
The A318/A319/A320/A321 defaults to the realistic company route format, but if you prefer to save your
company routes with the runways and SID/STAR it will allow you to do so by editing a configuration file.
Look for the FMGS.ini file in the \Aerosoft A318-A319 Professional\Data folder You will find:
[CoRte]
FullRoute=0
Default this is [0] indicating it will save realistic company routes. Change it to [1] and it will save the
complete but slightly less realistic flight routes.