Thrust Lever Setup

A318/A319/A320/A321
Professional
P3D Thrust Lever Setup
(only in case you have issues!)
Vol
7
07-03-4
10 July 2018
SETTINGS INSIDE P3D
Go slow, make sure you check the images thoroughly so
you do not miss any of the settings!
In P3D select “Settings”, then “Controls…”. We’ll look at the CALIBRATION tab first
Note that preferably the Null Zones should be set to minimum and Sensitivity set to Maximum.
Now click the CONTROL AXES tab. If you only have a single joystick with one throttle axis, the P3D controller
menus should look like this: