Thrust Lever Setup

A318/A319/A320/A321

Professional

P3D Thrust Lever Setup

(only in case you have issues!)

Vol

07-03-3

10 July 2018

buttons are shown. You can test but it is better to calibrate. Select Settings/Calibrate and follow the

instructions. Take your time, this really is important. If you ever have problems again, always calibrate first

before doing anything else!

CHECK THE CONFIGURATION

The next thing we are going to check is the setting in the configuration files of the Aerosoft Airbus. Start the

Aerosoft Airbus A318/A319 Configurator (it’s in the Windows Startmenu). You are looking at the FADEC

section here.

If you found the throttles to work inverted you now know what to click. Make sure you select the right

number of Throttle axis, if you got a dual controller make sure 2 is selected. It is not a bad idea to activate

logging of AsInput because it can help to debug things. Just close the configurator, the new settings will be

stored.

Now let’s start P3D.