Step by Step Guide

A318/319/320/321
Profesional
Step-By-Step Tutorial
Vol
6
06-01- 70
11. Dezember 2018
5.25 Parking
PARKING
NO.
PANEL
ACTION
REMARK
TYP
PART (Name)
PART (No.)
PF (PILOT FLYING)
PM (PILOT MONITORING)
319
PEDESTAL
RADIO
1
ATC (if no AUTO position)
STBY / OFF
320
OVERHEAD
ANTI-ICE
8
ANTI ICE (WING and ENGINES 1&2)
CHECK = OFF
321
PEDESTAL
RADIO
1
GROUND CONTACT
ESTABLISH
If ATC is used
322
PEDESTAL
P.BRAKE
7
PARKING BRAKE ON
SET ON
P3D: CTRL + . (period)
323
PEDESTAL
ENGINE
5
ENG MASTER 1 & 2
OFF
Start Checklist / Co-Pilot - if selected
324
Settings
MCDU
GRND SERV
CHOCKS
SET
CoP
325
PEDESTAL
P.BRAKE
7
PARKING BRAKE
OFF
CoP
P3D: . (period)
326
OVERHEAD
SIGNS
11
SEAT BELTS
OFF
CoP
327
OVERHEAD
EXT. LIGHTS
9
BEACON LIGHT
OFF
CoP
328
OVERHEAD
EXT. LIGHTS
9
RWY TURN OFF
OFF
CoP
329
OVERHEAD
EXT. LIGHTS
9
NOSE
OFF
CoP
330
OVERHEAD
ANTI-ICE
8
WING & ENGINE ANTI ICE = OFF
CHECK
Cop
331
OVERHEAD
FUEL
2
FUEL PUMPS
OFF
CoP
OFF should appear
332
PEDESTAL
RADIO
3
TRANSPONDER
OFF
CoP
Checklist complete
333
Settings
MCDU
GRND SERV
CONES
SET
334
Settings
MCDU
GRND SERV
ESTABLISH EXTERNAL POWER
CONNECT
335
OVERHEAD
EXT POWER
6
EXT. POWER = AVAILABLE
SET TO ON
328
OVERHEAD
APU
10
APU MASTER
SET TO OFF
329
Settigns
MCDU
MENU
ACFT DOORS
DOORS
OPEN (AS REQUIRED)
214.
CHOCKS / PARKING BRAKE: Because the brakes must cool off after landing, the parking brake can be
released after the chocks have been set. The plane is then just held by the chocks only.
215.
EXT POWER: Depending on the situation at the airport direct external power or delivered by a GPU is
used to deliver the power needed. Please select the equivalent. For Vienna we just use EXTERNAL
POWER (no GPU).
216.
APU: After the connection to external power is established the APU can be set to OFF.
GSX:
Open the GSX window (CRTL + F12) and select your options.
5 Minutes after the “Parking CL” has been finished the complete system (incl. MCDU) is automatically reset and
you are able to prepare for a “turnaround” e. g. starting again with the “Cockpit Preparation CL”. A specific
information is available in the infobar.
5.26 Securing Aircraft
SECURING AIRCRAFT
NO.
PANEL
ACTION
REMARK
TYP
PART (Name)
PART (No.)
PF (PILOT FLYING)
PM (PILOT MONITORING)
330
OVERHEAD
ADIRS
ADIRS (1 + 2 + 3)
OFF
331
OVERHEAD
EXT. LIGHTS
9
STROBE / NAV. LIGHTS
OFF
332
OVERHEAD
SIGNS
11
NO SMOKING & EMERGENCY LIGHT
OFF
333
Settigns
MCDU
MENU
ACFT DOORS
DOORS
CLOSE (AS REQUIRED)
334
OVERHEAD
EXT. PWR
6
EXT PWR
AS REQUIRED
335
OVERHEAD
ELEC
5
GEN 1 + 2 (Electric Generators)
PRESS
OFF should appear
336
PEDESTAL
INT. LIGHT
3
INTEG LT
OFF
337
MAIN PANEL
PFD LIGHT
8
SWITCH
OFF
338
MAIN PANEL
ND LIGHT
8
SWITCH
OFF
339
ECAM
DIMMER
4
SWITCH UPPER and LOWER
OFF
340
PEDESTAL
RADIO
1
RADIO CONTROL PANEL
OFF
341
PEDESTAL
TCAS
10
TCAS = STBY
SET
342
OVERHEAD
BATTERIES
4
BAT 1 + 2
OFF
217.
Exterior Lights: Switch off all exterior lights.
218.
Cockpit „COLD DARK“: Now the status of the cockpit should be “COLD DARK”. All systems and switches
should be “OFF”. Before switching the batteries to OFF the panel should look like in the following picture: