Step by Step Guide

A318/319/320/321

Profesional

Step-By-Step Tutorial

Vol

06-01- 6

11. Dezember 2018

There is also a Panelbar available which allows you to get fast access to a lot of other fixed predefined

views – please see chapter 4.6 (OPTIONS).

Using the various keyboard combinations (please see details below) all views can be changed

• For all views the eye point can be changed except: 2 D Glareshield, 2D MCDU, Radio and TCAS

• For all views a "Pan Reset Function" is integrated e. g. after re-opening the view again the original

view is reset. This is important so that for some very special views like the FCU, pedestal, overhead

etc. the views do not end "somewhere" if opened again.

First open it e. g. to become the active window. Then the following key combinations are available:

• CTRL + Return - Left

• CTRL + Backspace - Right

• CTRL + SHIFT + Return - Forward

• CTRL + SHIFT + Backspace - Backwards

• SHIFT + Return - Higher

• SHIFT + Backspace - Lower

• SPACE BAR + Mouse wheel - Zoom in or out

• SPACE BAR + Mouse - Changing the view angle

2.1 Glareshield and Main Panel

Glareshield and Main Panel (F9)

1 = PFD (Primary Flight Display)

2 = ND (Navigation Display)

3 = EFIS (Electronic Flight Information System)

4 = FCU (Flight Control Unit)

5 = E/WD (Engine- and Warning Display)

6 = Gear and Brakes

7 = Chronometer Controls

8 = Dimmer for PFD and ND

9 = Master Warning and Master Caution Lights

10 = A/Skid & Nose Wheel Steering

11 = Brake Fan

12 = EGPWS – Terrain on ND switch

13 = ISIS – Standby Altimeter