Step by Step Guide

A318/319/320/321
Profesional
Step-By-Step Tutorial
Vol
6
06-01- 4
11. Dezember 2018
In the following paragraph the various panel and cockpit views are explained together with the terms
used in the tutorial, this will enable the user to find the knobs, switches and buttons that the tutorial
refers to. They are the Glareshield, Main Panel, MCDU, ECAM, Pedestal/Radio and the Overhead Panel.
The Aerosoft A318/319/320/321 does not have a 2D panel - only a virtual cockpit, therefore to make it
easier to use ,6 fixed virtual 2D cockpit views have been created. These views can be accessed using
three different methods.
• P3D Menu: Views – View Mode – Cockpit – ……..
• Keyboard: F9 = Glareshield – Main Panel, F10 = ECAM / left and Settings MCDU, F11 = Pedestal /
Radio and F12 = Overhead.
• Keyboard: F9 = Glareshield – Main Panel and then use the [A] key to toggle between the various
views like left MCDU, Settings MCDU, etc.
Default VC view, selected with the [S] key and where needed cycled to
this view with the [A] key.
Main Panel and Glareshield View (similar to a 2D panel) selected with [F9]
2. Panels and Instruments: